131Functions Used As NeededSet ModeTurning on/off the transceiver at the specified timeTimer FunctionYou can turn the transceiver to turn on/off at the set time. Before using this function,adjust the clock. See “Setting clock time” on page 34.Enter the Set mode:1 Press and hold M over 1 second.2 Turn O to select [8 CONFIG].3 Press H.4 Turn O to select [11 TIMER].5 Press H.6 Turn O to select [ON] or [OFF].ON: Turns on the transceiver at the specified time.OFF: Turns off the transceiver at the specified time.7 Press H.8 Turn O to specify hours.9 Press H.10 Turn O to specify minutes.11 Press H.12 Turn O to switch between ON/OFF of the timer.13 Press M.The timer function is turned on.14 Press p to exit from the Set mode.Password FunctionYou can enter a 4-character password to prevent a third party from using yourtransceiver without permission. Once a password is entered, the transceiver cannot beturned on until the valid password is entered.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [8 CONFIG].3 Press H.4 Turn O to select [12 PASSWORD].5 Press H.6 Press H.
