114Functions Used As NeededSet Mode4 Turn O to select [3 AUDIO].5 Press H.6 Turn O to select [1 MIC GAIN].7 Press H.8 Turn O to select a microphone sensitivity level.Select a microphone gain level from the following:LEVEL 1 (Lowest sensitivity) to LEVEL 9 (Highestsensitivity)Remark Default: LEVEL 59 Press M twice.The selected microphone gain level is set.10 Press p to exit the Set mode.Tips• Increasing the microphone gain excessively can distort the sound or pick up the surrounding noise,impairing intelligibility.• Be sure to adjust the microphone gain whenever you change microphones.Muting VoiceIn the dual reception mode, the audio being received on the non-operating band ismuted when a signal is herd on the operating band.For more details, see “Muting Audio” on page 35.Simultaneously radio broadcast receptionSet the mute time of the simultaneous broadcast reception.For more details, see “AF-DUAL Function” for simultaneously monitoring the amateurfrequency while listening to the broadcast radio.Changing the sound volume setting methodYou can set the sound volume adjustment mode to be automatically canceled afterabout 3 seconds, after pressing v and then adjusting the sound volume with O.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [2 TX/RX].3 Press H.䎶 䎨 䎷 䎝 䎃 䎃䎕 䎃 䎷 䎻 䎒 䎵 䎻䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎖 䎃 䎰䎨䎰䎲䎵 䎼䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎗 䎃 䎶 䎬 䎪 䎱 䎤 䎯 䎬 䎱 䎪䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎘 䎃 䎶䎦䎤䎱䎖 䎃 䎤 䎸 䎧 䎬 䎲䎔 䎃 䎰 䎲 䎧 䎨䎰 䎲 䎧 䎨䎃 䎕 䎃 䎧 䎬 䎪 䎬 䎷 䎤 䎯䎔 䎃 䎰 䎬 䎦 䎃 䎃䎪 䎤 䎬 䎱䎕 䎃 䎰 䎸 䎷 䎨䎃 䎖 䎃 䎵 䎻 䎃 䎤 䎩 䎃 䎧 䎸 䎤 䎯䎧 䎸 䎤 䎯䎃 䎗 䎃䎗 䎃 䎃䎹 䎲 䎯䎹 䎲 䎯 䎃 䎰 䎲 䎧 䎨䎃 䎔 䎃 䎰 䎬 䎦 䎃 䎪 䎤 䎬 䎱䎃 䎃 䎃 䎃 䎃 䎃 䎯 䎨 䎹 䎨 䎯 䎃 䎘
