63Scanning FunctionUsing the Scanning Function Canceling Bank Link Scanning1 Press F and then B.2 Recall the memory bank for which bank link scanning was specified.3 Press V.The memory bank number changes from [b] to [B], indicating that the bank link hasbeen deactivated.Programmable Memory Channel Scan (PMS)Registering to a Programmable Memory Channel50 sets of PMS memory channels (L1/U1 to L50/U50) are available.Specify the lower limit frequency of the frequency range you want to scan for memorychannel [L], and the upper limit frequency for [U].Enter a number between 1 and 50 for . Use the same number for the lower and upperlimit memory channels.Specify the lower limit frequency and upper limit frequency for the PMS memory channel(See page 43).PMS memory channels are located next to the last memory channel.Pressing M scans PMS memory channels quickly in steps of 100 memory channels.Example: When registering the lower limit frequency 145.160 MHz and the upper limitfrequency 145.460 MHz to a PMS memory channel.Lower limit frequency L1 Upper limit frequency U1CautionWhen the upper and lower limit frequencies have been set in different step, be sure to set 100 kHz ormore in between.
