117Functions Used As NeededSet ModeRegistering to a memory channel with the lowest memorychannel numberMemory Channel Write FunctionWhen registering to a memory channel. you can display an unregistered memorychannel with the lowest memory channel number.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [3 MEMORY].3 Press H.4 Turn O to select [6 MEMORY WRITE].5 Press H.6 Turn O to select [LOWER].A memory channel with the lowest memory channelnumber appears on the LCD.Remark Default: NEXT7 Press p to set the memory channel registration to thelowest unregistered memory channel number, and exitfrom the Set mode.Notifying a call from a remote station by the bellNotifies you of a call from a remote station by the bell.See “Notification of a Call from a Remote Station by the Bell” on page 89.Selecting a DCS codeSelect the DCS code from 104 codes from 023 to 754.For more details, see “Setting a DCS Code” on page 86.Transmit and receive a DCS Code with a inverted phaseDCS INVERSION FunctionYou can transmit and receive a DCS code with an inverted phase when using the digitalcode squelch function.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [4 SIGNALING].3 Press H.䎖 䎃 䎃 䎧 䎦 䎶 䎃 䎃 䎬 䎱 䎹 䎨 䎵 䎶 䎬 䎲 䎱䎗 䎃 䎃 䎧 䎷 䎰 䎩 䎃 䎃䎰䎲䎧 䎨䎘 䫹 䎧 䎷 䎰 䎩 䎃 䎃䎶 䎨 䎯 䎨 䎦 䎷䎙 䫹 䎳 䎤 䎪 䎨 䎵䎶 䎨 䎷 䎝 䎃 䎃 䎗䎶 䎨 䎷 䎝 䎃 䎃 䎗 䎃 䎶 䎬 䎪 䎱 䎤 䎯 䎬 䎱 䎪䎱 䎪䎃 䎃 䎃 䎃 䎃 䎃 䎃䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎘 䎃 䎶 䎦 䎤 䎱䎃 䎃 䎃 䎃 䎃 䎃䎃 䎃 䎃 䎃 䎃 䎃 䫹䎙 䎃 䎪 䎰䎃 䎃 䎃 䎃 䎃 䎃 䎃䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎚 䎃 䎺 䎬 䎵 䎨 䎶 䙵 䎻
