93Communicating with a Specific Remote StationUsing the Tone Squelch FunctionBeing Called by the Remote Station (Standby Operation)If you use the new pager function on the same frequency as the remote station, the[PAG] icon displayed on the LCD changes to [PIN], alerting that you have been called bythe remote station. In addition, if you turn on the “bell function” (See page 89), you canconfirm a call from the remote station by the [PAG] display, the blinking [b] icon, andthe bell sound. Also, if you turn on the “vibrator function” (See page 88), the vibrator willconfirm a call from the remote station.TipSelecting [4 SIGNALING] [9 PAGER ANS-BACK] [ON] in the Set mode automatically places thetransceiver in the transmission mode (for about 2.5 seconds) when called by the remote party, andnotifies the remote party to get ready for communication.When calledBlinks