132Functions Used As NeededSet Mode7 Turn O to enter the first character of the password.Enter the first character (0-9. A to D, , and #) of thepassword.8 Press H.The cursor moves to the next character position.9 Repeat steps 7 and 8 to enter the remaining threecharacters.10 Press H.11 Turn O to select [ON].Remark Default: OFF12 Press p to save the password setting, and exit the Set mode.Tips• To cancel the password function, execute the above-mentioned steps 1 to 5, select “OFF” with O,and then press p over 1 second.• Keypad keys cannot be used to enter the password.• When the on-timer function is active, the password function is ineffective. Turning on the transceiver using a password1 Press and hold P for over 1 second.The password entry screen appears.2 Enter the password using keypad keys.Enter the registered 4-character password.When the valid password is entered, the frequency display screen appears.Remark When an invalid password is entered, the transceiver is turned off automatically.CautionIf you’ve forget the registered password, carrying out all resetting allows you to turn on the transceiverwithout entering the password.It should be noted that performing all resetting resets (initializes) all information such as theinformation registered to memory channels and various setting values.It is recommended that the password be written down on paper.
