96Functions Used As NeededSet ModeSet mode option No./setting Item Description of function Setting Item(Bold letters: Default)Referencepage2-2-2 SQL TYPE Select SQL Type in the DIGITALmode.SQL TYPE: OFF / CODE /BREAKCODE: 001 to 1261122-2-3 DIGI POP UP Set the POP UP time. OFF BND2s / BND4s / BND6s /BND8s / BND10s / BND20s /BND30s / BND60s / BNDCNT1122-2-4 LOCATIONSERVICESet whether or not to displaythe current location of your ownstation in the digital mode.ON / OFF* For more details of this function, refer tothe GM Function Instruction Manual.2-2-5 DSP Ver DSP version display Version display 1132-3 AUDIO2-3-1 MIC GAIN Adjust the microphone gain level. LEVEL 1 to LEVEL 9 LEVEL 5 1132-3-2 MUTE Set the muting level on the non-operating side when a signal isreceived on the operating bandside.OFF / MUTE30% / MUTE50% /MUTE 100%352-3-3 RX AF DUAL Set the resumption time of radioreception in the AF Dual mode.Transmission and reception 1second to 10 seconds, Fixed,or transmission 1 second to 10seconds.Transmission 2 seconds782-3-4 VOL MODE Set v key. NORMAL / AUTO BACK 1143 MEMORY3-1 BANK LINK Set memory bank link. BANK 1 to BANK 24, BANK LINKON / OFF1153-2 BANK NAME Assign a name to a memorybank.BANK1 to BANK24 493-3 MEMORY NAME Enter a memory channel tag. Up to 16 characters 473-4 MEMORY PROTECT Allow or prohibit memory channelregistration.OFF / ON 1163-5 MEMORY SKIP Set memory channels or selectedmemory channels to skip.OFF / SKIP / SELECT 603-6 MEMORY WRITE Set the automatic increment todisplay memory channel to beregistered.NEXT / LOWER 1174 SIGNALING4-1 BELL Set the number of bell ring. SELECT: OFF / BELLRINGER: 1 time to 20 times /Continuous894-2 DCS CODE Set the DCS code. DCS 023 to DCS 754 86
