134Functions Used As NeededSet ModeSetting the direction for repeater shiftRPT SHIFT FunctionYou can set the direction of repeater shift.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [8 CONFIG].3 Press H.4 Turn O to select [15 RPT SHIFT].5 Press H.6 Turn O to select the shift direction.SIMPLEX: Does not shift.–RPT: Shifts toward lower frequencies.+RPT: Shifts toward higher frequencies.Remark Default setting differs depending frequency7 Press p to save the repeater shift direction setting, andexit the Set mode.Setting the range for repeater shiftRPT SHIFT FREQ FunctionYou can set the repeater shift range.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [8 CONFIG].3 Press H.4 Turn O to select [16 RPT SHIFT FREQ].5 Press H.6 Turn O to select shift range.The range can be set in steps of 50 kHz between 0.0000MHz and 150.000 MHz.Pressing F and then turning O allows you to setfrequencies in steps of 1 MHz.Remark Default setting differs depending frequency7 Press p to save the repeater shift range setting, and exitthe Set mode.
