Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Vacon 100 INDUSTRIAL manuals

100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. General
  3. Installation
  4. Cable requirements
  5. FI: VACON ® 100 -taajuusmuuttajan syöttökytkin
  6. Asennus
  7. Kaapelivaatimukset
  8. Allgemeines
  10. Kabelanforderungen
  11. Général
  13. Caractéristiques des câbles
  14. SE: VACON ® 100 lastbrytare
  16. Krav på kablar
  17. Algemeen
  18. Installatie
  19. Kabelvereisten
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Approvals
  4. Safety
  5. Warnings
  6. Earthing and earth fault protection
  7. Electro-magnetic compatibility (EMC)
  8. Receipt of delivery
  9. Type designation code
  10. Unpacking and lifting the AC drive
  11. Accessories
  12. Frame MR6
  13. Frame MR9
  14. Product modified' sticker
  15. Mounting
  16. Flange mount
  17. Cooling
  18. Power cabling
  19. UL standards on cabling
  20. Brake resistor cables
  21. Frames MR4 to MR7
  22. Frames MR8 and MR9
  23. Installation in corner-grounded network
  24. Control unit
  25. Control unit cabling
  26. Control terminals and DIP switches
  27. Fieldbus connection
  28. Prepare for use through ethernet
  29. Prepare for use through RS485
  30. Option board installation
  31. Battery installation for Real Time Clock (RTC)
  32. Galvanic isolation barriers
  33. Commissioning
  34. Commissioning of the drive
  35. Cable and motor insulation checks
  36. Installation in it system
  37. Frames MR7 and MR8
  39. Maintenance
  40. Technical data, Vacon 100
  41. Mains voltage 380-500 V
  42. Definitions of overloadability
  43. Brake resistor ratings
  44. Vacon 100 - technical data
  45. Technical information on control connections
  46. Technical data, Vacon 100 FLOW
  49. Vacon 100 FLOW - technical data
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Preface About this manual
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Approvals
  6. Safety
  7. Caution
  8. Grounding and earth fault protection
  9. Electro-magnetic compatibility (EMC)
  10. Receiving the delivery
  11. Type designation code
  12. Lifting the frames MR8 and MR9
  13. Accessories
  14. Frame MR4
  15. Frame MR6
  16. Frame MR7
  17. Frame MR9
  18. Mounting
  19. Wall mounting of MR5
  20. Wall mounting of MR6
  21. Wall mounting of MR7
  22. Wall mounting of MR8, IP21 and IP54
  23. Wall mounting of MR8, IP00
  24. Wall mounting of MR9, IP21 and IP54
  25. Wall mounting of MR9, IP00
  26. Dimensions for wall mounting, North America
  27. Wall mounting of MR5, North America
  28. Wall mounting of MR6, North America
  29. Wall mounting of MR7, North America
  30. Wall mounting of MR8, North America
  31. Wall mounting of MR8, UL Open Type, North America
  32. Wall mounting of MR9, North America
  33. Wall mounting of MR9, UL Open Type, North America
  34. Flange mounting of MR4
  35. Flange mounting of MR5
  36. Flange mounting of MR6
  37. Flange mounting of MR7
  38. Flange mounting of MR8
  39. Flange mounting of MR9
  40. Dimensions for flange mounting, North America
  41. Flange mounting of MR5, North America
  42. Flange mounting of MR6, North America
  43. Flange mounting of MR7, North America
  44. Flange mounting of MR8, North America
  45. Flange mounting of MR9, North America
  46. Cooling
  47. Power cabling
  48. UL standards on cabling
  49. Cable and fuse sizes, North America
  50. Brake resistor cables
  51. Preparing for the cable installation
  52. Frames MR8 to MR9
  53. Installation in a corner-grounded network
  54. Control unit
  55. Control unit cabling
  56. Control terminals and DIP switches
  57. Fieldbus connection
  58. Using fieldbus through an Ethernet cable
  59. Using fieldbus through an RS485 cable
  60. Installation of option boards
  61. The installation procedure
  62. Installation of a battery for the Real Time Clock (RTC)
  63. Commissioning and additional instructions
  64. Operation of the motor
  65. Installation in a marine environment
  66. The EMC jumper in MR7
  67. The EMC jumper in MR8
  68. The EMC jumper in MR9
  69. Maintenance
  70. Technical data, Vacon ® 100
  71. Mains voltage 380-500 V
  72. Mains voltage 525-600 V
  73. Mains voltage 525-690 V
  74. Brake resistor ratings
  75. Vacon ® 100 - technical data
  76. Technical data, Vacon ® 100 FLOW
  80. Vacon ® 100 FLOW - technical data
  81. Technical data, Vacon® 100 HVAC
  83. Overload capability
  84. Vacon ® 100 HVAC - technical data
  85. Technical data on control connections
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Safety
  3. Warnings
  4. Earthing and earth fault protection
  5. BACnet - general info
  6. BACnet technical data
  7. Programming
  8. BACnet MS/TP parameters and monitoring values
  9. BACnet IP parameters and monitoring values
  10. BACnet MS/TP parameter descriptions
  11. BACnet MS/TP monitoring values
  12. BACnet IP parameter descriptions
  13. BACnet IP settings
  14. BACnet IP monitoring values
  15. Installation
  16. Prepare for use through Ethernet
  17. Prepare for use through RS485
  20. Communications
  21. Binary Value Object
  22. Analogue Value Object
  23. Control word bits
  24. Processdata mapping in drive application
  25. Fault tracing
  26. Other fault conditions
  27. Quick setup
  28. Annex - Protocol implementation conformance statement
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Safety
  4. Warnings
  5. Earthing and earth fault protection
  6. Modbus - general info
  7. Modbus technical data
  8. Connections and wiring
  9. Installation
  10. Prepare for use through ethernet
  11. Prepare for use through RS485
  14. Fiedlbus parametrization
  15. Enabling Modbus protocol
  16. Slave address
  17. IDMap IDs
  18. Illegal functions
  19. Modbus TCP/UDP parameters and monitoring values
  20. Fixed Subnet Mask
  21. Connection limit
  22. Communications
  23. Modbus data mapping
  24. Holding registers and input registers
  25. Vacon Application IDs
  26. FB Process data OUT
  27. ID map
  28. Operation day counter
  29. Resettable operation day counter
  30. Energy counter
  31. Resettable energy counter
  32. Fault history
  33. Modbus TCP/UDP communication and connection timeout
  34. Example messages
  35. Example 2 - Read process data
  36. Example 3 - Exception response
  37. Fault tracing
  38. Other fault conditions
  39. Quick setup
  40. APPENDIX 1 - PROCESS DATA
  41. APPENDIX 2 - CONTROL AND STATUS WORD
  42. Status Word Descriptions
  43. APPENDIX 6 - LWIP LICENCE
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Safety
  4. Warnings
  5. Earthing and earth fault protection
  6. EtherNet/IP - General info
  7. ACD (Address Conflict Detection)
  8. Ethernet installation
  9. Prepare for use through Ethernet
  10. Installation in VACON® 100 x
  11. Commissioning
  12. Fixed IP address, subnet mask and default gateway
  13. Protocol in use
  14. EtherNet/IP connection example
  15. EtherNet/IP
  16. Explicit Messaging
  17. General CIP error codes
  18. Connection Manager Object Error codes
  19. Supported CIP and Vendor Objects
  20. EtherNet/IP communication and connection timeout
  21. Common Industrial Objects implemented by vacon® 100 family
  22. Message Router Object, Class 0x02
  23. TCP/IP Interface Object, Class 0xF5
  24. Ethernet Link Object, Class 0xF6
  25. Objects Present in an AC/DC Drive
  26. Control Supervisor Object, Class 0x29
  27. AC/DC Drive Object, Class 0x2A
  28. Vendor Specific Objects
  29. Assembly Instance Selector Object, Class 0xBE
  30. Motor Control Mode Object, Class 0xA1
  31. Fault History Object, class 0xA2
  32. Assembly instances implemented by vacon® 100 family
  33. ODVA Output Instances
  34. ODVA Input instances
  35. Vendor-specific I/O Assembly Instances
  36. Vendor Input Instances
  37. Mapping of Standard Output Assemblies onto VACON® data
  38. Direction bit in VACON® FBFixedControlWord
  39. Direction Indication bit in VACON® FBFixedStatusWord
  40. APPENDIX 1 - VENDOR CONTROL AND STATUS WORD DESCRIPTIONS
  41. FBFixedStatusWord and FBGeneralStatusWord
  42. APPENDIX 2 - FIELDBUS PARAMETRISATION
  43. APPENDIX 3 - LWIP LICENCE
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Preface Document details
  2. Table Of Contents
  3. Table Of Contents
  4. TABLE OF CONTENTS VACON
  5. Approvals
  6. Safety
  7. Caution
  8. Grounding and earth fault protection
  9. Using an RCD or an RCM device
  10. Receiving the delivery
  11. Type designation code
  12. Removing the packaging and lifting the AC drive
  13. Product modified" label
  14. Disposal
  15. Mounting dimensions
  16. Dimensions of MR9, IP00
  17. Dimensions of MR10 and MR12, IP00
  18. Dimensions for flange mounting of MR8
  19. Dimensions for flange mounting of MR9
  20. Dimensions for flange mounting of MR10
  21. Dimensions of options for MR10 and MR12
  22. Installation into cabinet
  23. General information about the installation, MR10
  24. General information about the installation, MR12
  25. Mechanical installation
  26. Installing the IP00 drive module into the cabinet
  27. Flange mounting of the IP00 drive module
  28. Installing a detached control unit
  29. Cooling and free space around the AC drive
  30. Power cabling
  31. Cable and fuse sizes, North America
  32. Brake resistor cables
  33. Preparing for the cable installation
  34. Cable installation
  35. Enclosure sizes MR10 and MR12
  36. Control unit
  37. Control unit cabling
  38. Fieldbus connection
  39. Using fieldbus through an Ethernet cable
  40. Using fieldbus through an RS485 cable
  41. Installation of option boards
  42. The installation procedure
  43. Installation of a battery for the Real Time Clock (RTC)
  44. Commissioning and additional instructions
  45. Operation of the motor
  46. Installation in an IT system
  47. The EMC jumper in MR9
  48. The EMC jumper in MR10 and MR12
  49. Maintenance
  50. Replacing the fans of the AC drive
  51. Downloading the software
  52. Technical data, VACON ® 100 INDUSTRIAL
  53. Mains voltage 380-500 V
  54. Mains voltage 525-690 V
  55. Brake resistor ratings
  56. VACON ® 100 INDUSTRIAL - technical data
  57. Technical data, VACON ® 100 FLOW
  60. VACON ® 100 FLOW - technical data
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
Table of contents
  1. Preface Document details
  2. Table Of Contents
  3. Table Of Contents
  4. Approvals
  5. Safety
  6. Caution
  7. Grounding and earth fault protection
  8. Using an RCD or an RCM device
  9. Receiving the delivery
  10. Type designation code
  11. Removing the packaging and lifting the AC drive
  12. Product modified" label
  13. Disposal
  14. Mounting
  15. Dimensions of the cabinet with additional cabinet sections, IEC
  16. Dimensions of the cabinet, NAM
  17. Dimensions of the cabinet, with additional cabinet sections, NAM
  18. The options
  19. Installation of the cabinet
  20. Cooling and free space around the AC drive
  21. The optional back channel cooling
  22. Power cabling
  23. Cable and fuse sizes, IEC
  24. Cable and fuse sizes, NAM
  25. Brake resistor cables
  26. Preparing for the cable installation
  27. Cable installation in MR8-MR12
  28. Installing the cables
  29. Control compartment
  30. Fieldbus connection
  31. Using fieldbus through an RS485 cable
  32. Commissioning and additional instructions
  33. Operation of the motor
  34. Installation in a corner-grounded network
  35. The EMC jumper in MR9
  36. The EMC jumper in MR10 and MR12
  37. Maintenance
  38. Replacing the air filters of the AC drive
  39. Replacing the fans of the AC drive
  40. Replacing the power unit of the AC drive
  41. Downloading the software
  42. Technical data, VACON ® 100 INDUSTRIAL
  43. Mains voltage 525-690 V
  44. VACON ® 100 INDUSTRIAL - technical data
  45. Technical data, VACON ® 100 FLOW
  47. VACON ® 100 FLOW - technical data
  48. Technical data on control connections
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Introduction
  3. dU/dt filter range
  4. Installation
  5. Filter types
  6. Safe operating curves
  7. How to select a filter
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Safety
  3. Warnings
  4. Earthing and earth fault protection
  5. Modbus - general info
  6. Modbus technical data
  7. Installation
  8. Prepare for use through ethernet
  9. Prepare for use through RS485
  10. Installation in Vacon® 100 X
  12. Programming
  13. Modbus RS-485 parameters and monitoring values
  14. Modbus TCP parameters and monitoring values
  15. Modbus RTU parameter descriptions
  16. Modbus RTU monitoring values
  17. Modbus TCP parameter descriptions
  18. Modbus TCP monitoring values
  19. Communications
  20. Modbus data mapping
  21. Fault tracing
  22. Quick setup
  23. Annex
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Servo Drives
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Preface About this manual
  2. Table Of Contents
  3. Table Of Contents
  4. Approvals
  5. Safety
  6. Caution
  7. Earthing and earth fault protection
  8. Using an RCD or an RCM device
  9. Receiving the delivery
  10. Type designation code
  11. Removing the packaging and lifting the AC drive
  12. Product modified" label
  13. Mounting
  14. Installation of the cabinet
  15. Cooling and free space around the AC drive
  16. The optional back channel cooling
  17. Using the back channel for cooling
  18. Power cabling
  19. Brake resistor cables
  20. Preparing for the cable installation
  21. Cable installation
  22. Frame MR10
  23. Control compartment
  24. Fieldbus connection
  25. Using fieldbus through an Ethernet cable
  26. Using fieldbus through an RS485 cable
  27. Commissioning and additional instructions
  28. Operation of the motor
  29. Maintenance
  30. Replacing the filters of the AC drive
  31. Replacing the fans of the AC drive
  32. Replacing the power unit of the AC drive
  33. Mains voltage 380-500 V
  34. Technical data, Vacon
  36. Technical data on control connections
  37. Options
  38. The codes of the options
  39. FLOW
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Vacon 100 - Startup
  4. Standard Application Wizard
  5. Local/Remote Application Wizard
  6. Multi-Step Speed Application Wizard
  7. PID Control Application Wizard
  8. Multi-Purpose Application Wizard
  9. Motor Potentiometer Application Wizard
  10. Multi-Pump wizard
  11. Fire mode wizard
  12. Keypad of the drive
  13. Vacon graphical keypad
  14. Vacon text keypad
  15. Using the text keypad
  16. Menu structure
  17. Quick setup
  18. Parameters
  19. I/O and hardware
  20. User settings
  21. Favorites
  22. Vacon 100 Application
  23. Quick setup parameter group
  24. Standard Control Application
  25. Local/Remote Control Application
  26. Multi-Step Speed Control Application
  27. PID Control Application
  28. Multi-Purpose Control Application
  29. Motor Potentiometer Control Application
  30. Monitor group
  31. Basic
  32. Temperature inputs
  33. Extras & advanced
  34. Timer functions monitoring
  35. External PID-controller monitoring
  36. Fieldbus data monitoring
  37. Programming of digital and analogue inputs
  38. Group 3.1: Motor settings
  39. Group 3.2: Start/Stop setup
  40. Group 3.3: References
  41. Group 3.4: Ramps & Brakes Setup
  42. Group 3.5: I/O Configuration
  43. Group 3.6: Fieldbus Data Mapping
  44. Group 3.7: Prohibit Frequencies
  45. Group 3.8: Supervisions
  46. Group 3.9: Protections
  47. Group 3.10: Automatic reset
  48. Group 3.11: Application settings
  49. Group 3.13: PID-controller 1
  50. Group 3.14: External PID-controller
  51. Group 3.15: Multi-pump
  52. Group 3.16: Maintenance counters
  53. Group 3.17: Fire mode
  54. Group 3.18: Motor preheat parameters
  55. Group 3.20: Mechanical brake
  56. Group 3.21: Pump control
  57. Additional parameter information
  58. Tel. +358 (0) 201 2121 • Fax +358 (0)201 212
  59. Counters
  60. Fault tracing
  61. Fault codes
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Safety
  3. Warnings
  4. Earthing and earth fault protection
  5. PROFINET IO - general info
  6. PROFINET IO installation
  7. Prepare for use through Ethernet
  8. Commissioning
  9. PROFINET IO parameters and monitoring values
  10. PROFIdrive 4.1 State Machine
  11. Base Mode Parameter Access Model
  12. Parameter requests
  13. Parameter responses
  14. Drive parameter access using application ID
  15. Parameter channel examples
  16. Communications
  17. PROFIdrive parameters for PROFINET IO communication interface
  18. Vendor-specific PROFIdrive parameters
  19. Telegram building blocks
  20. PROFIdrive Standard Telegram 1 and vendor-specific variants
  21. Vendor-specific Telegram 1 and its variant
  22. Vendor-specific Telegram 2 and its variants
  23. Vendor-specific Telegram 3 and its variants
  24. Fault tracing
  25. Other fault conditions
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Safety
  3. Warnings
  4. Earthing and earth fault protection
  5. Modbus - general info
  6. Modbus technical data
  7. Modbus installation
  8. Prepare for use through ethernet
  9. Prepare for use through RTU
  10. Programming
  11. Modbus TCP parameters and monitoring values
  12. Modbus RTU parameter descriptions
  13. Modbus TCP parameter descriptions
  14. Modbus TCP settings
  15. Modbus TCP monitoring values
  16. Communications
  17. Modbus data mapping
  18. Example messages
  19. Fault tracing
  20. Other fault conditions
  21. Quick setup
  22. Annex
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Vacon 100 - Startup
  4. PID Mini-Wizard
  5. Multi-pump mini-wizard
  6. Fire Mode wizard
  7. Keypad of the drive
  8. Vacon keypad with graphical display
  9. Vacon keypad with text segment display
  10. Using the keypad
  11. Menu structure
  12. Quick setup
  13. Parameters
  14. I/O and hardware
  15. User settings
  16. Favourites
  17. Vacon HVAC Application
  18. Example of control connections
  19. Isolating digital inputs from ground
  20. HVAC Application - Quick setup parameter group
  21. Monitor group
  22. Timer functions monitoring
  23. PID1 controller monitoring
  24. Fieldbus data monitoring
  25. Temperature inputs monitoring
  26. Vacon HVAC Application - Application parameter lists
  27. Column explanations
  28. Parameter programming
  29. Group 3.1: Motor settings
  30. Group 3.2: Start/Stop setup
  31. Group 3.3: Control reference settings
  32. Group 3.4: Ramp & Brakes Setup
  33. Group 3.5: I/O Configuration
  34. Group 3.6: Fieldbus Data Mapping
  35. Group 3.7: Prohibit Frequencies
  36. Group 3.8: Limit supervisions
  37. Group 3.9: Protections
  38. Group 3.10: Automatic reset
  39. Group 3.11: Timer functions
  40. Group 3.12: PID-controller 1
  41. Group 3.13: PID-controller 2
  42. Group 3.14: Multi-pump
  43. Group 3.16: Fire mode
  44. Group 3.17: Application settings
  45. HVAC Application - Additional parameter information
  46. HVAC Application - Fault tracing
  47. Fault history
  48. Fault codes
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Approvals
  3. General
  4. References
  5. Installation of OPTBJ board
  6. OPTBJ board layout
  7. STO jumpers on the Vacon 100 drive
  8. STO and SS1 safety functions
  9. Safe Stop 1 (SS1) Principle
  10. Technical details
  11. Relay output
  12. Wiring examples
  13. Commissioning
  14. Checklist for commissioning the OPTBJ board
  15. Testing the Safe Torque Off (STO) or Safe Stop 1 (SS1) safety functions
  16. Maintenance
  17. Thermistor function (ATEX)
  18. Technical data
  19. Short circuit monitoring
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Preface About this manual
  2. Table Of Contents
  3. Approvals
  4. Safety
  5. Receiving the delivery
  6. Lifting the AC drive
  7. Mounting
  8. Dimensions of the enclosed drives
  9. Installation requirements
  10. The maximum vibration
  11. Installing a drive in an IT network
  12. Installing a drive in a grounded network: 525-690 V, enclosure sizes MR10-MR12, and the enclosed drives
  13. Installation procedure
  14. Installation of enclosed drives in a marine environment
  15. Commissioning and additional instructions
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Safety
  4. Warnings
  5. Earthing and earth fault protection
  6. Electro-magnetic compatibility (EMC)
  7. Receipt of delivery
  8. Type designation code
  9. Unpacking and lifting the AC drive
  10. Accessories
  11. Size MR6
  12. Size MR9
  13. Mounting
  14. Flange mount
  15. Cooling
  16. Power cabling
  17. UL standards on cabling
  18. Brake resistor cables
  19. Cable installation
  20. Frames MR8 and MR9
  21. Installation in corner-grounded network
  22. Control unit
  23. Control unit cabling
  24. Control terminals and DIP switches
  25. I/O cabling and Fieldbus connection
  26. Prepare for use through RS485
  27. Battery installation for Real Time Clock (RTC)
  28. Galvanic isolation barriers
  29. Commissioning
  30. Commissioning of the drive
  31. Cable and motor insulation checks
  32. Installation in it system
  33. Frames MR7 and MR8
  34. Frame MR9
  35. Maintenance
  36. Technical data
  37. Mains voltage 380-480 V
  38. Definitions of overloadability
  39. Vacon 100 - technical data
  40. Technical information on control connections
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Safety
  4. Warnings
  5. Earthing and earth fault protection
  6. Electro-magnetic compatibility (EMC)
  7. Receipt of delivery
  8. Type designation code
  9. Unpacking and lifting the AC drive
  10. Accessories
  11. Size MR6
  12. Size MR9
  13. Mounting
  14. Flange mount
  15. Cooling
  16. Power cabling
  17. UL standards on cabling
  18. Cable installation
  19. Frames MR4 to MR7
  20. Frames MR8 and MR9
  21. Installation in corner-grounded network
  22. Control unit
  23. Control unit cabling
  24. Control terminals and DIP switches
  25. I/O cabling and Fieldbus connection
  26. Prepare for use through RS485
  27. Battery installation for Real Time Clock (RTC)
  28. Galvanic isolation barriers
  29. Commissioning
  30. Commissioning of the drive
  31. Cable and motor insulation checks
  32. Installation in it system
  33. Frames MR7 and MR8
  34. Frame MR9
  35. Maintenance
  36. Technical data
  37. Mains voltage 380-480 V
  38. Definitions of overloadability
  39. Vacon 100 - technical data
  40. Technical information on control connections
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
Table of contents
  1. Preface About this manual
  2. Table Of Contents
  3. Table Of Contents
  4. Approvals
  5. Safety
  6. Caution
  7. Grounding and earth fault protection
  8. Using an RCD or an RCM device
  9. Receiving the delivery
  10. Type designation code
  11. Removing the packaging and lifting the AC drive
  12. Product modified" label
  13. Mounting
  14. Dimensions of the cabinet, NAM
  15. The options
  16. Installation of the cabinet
  17. Cooling and free space around the AC drive
  18. The optional back channel cooling
  19. Power cabling
  20. Cable and fuse sizes, NAM
  21. Brake resistor cables
  22. Preparing for the cable installation
  23. Cable installation in MR8-MR12
  24. Installing the cables
  25. Control compartment
  26. Fieldbus connection
  27. Using fieldbus through an RS485 cable
  28. Commissioning and additional instructions
  29. Operation of the motor
  30. The EMC jumper in MR8
  31. The EMC jumper in MR9
  32. The EMC jumper in MR10 and MR12
  33. Maintenance
  34. Replacing the air filters of the AC drive
  35. Replacing the fans of the AC drive
  36. Replacing the power unit of the AC drive
  37. Downloading the software
  38. Technical data, Vacon ® 100
  39. Mains voltage 525-690 V
  40. Vacon ® 100 - technical data
  41. Technical data, Vacon ® 100 FLOW
  43. Vacon ® 100 FLOW - technical data
  44. Technical data on control connections
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
Table of contents
  1. Preface Document details
  2. VACON
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Quick Startup Guide
  9. First start-up
  10. Description of the applications
  11. Local/Remote application
  12. Multi-step speed application
  13. PID control application
  14. Multi-purpose application
  15. Motor potentiometer application
  16. Wizards
  17. Local/Remote application wizard
  18. Multi-step speed application wizard
  19. PID control application wizard
  20. Multi-purpose application wizard
  21. Motor potentiometer application wizard
  22. Multi-pump wizard
  23. Fire mode wizard
  24. User interfaces
  25. Using the graphical display
  26. Resetting a fault
  27. Copying the parameters
  28. Comparing the parameters
  29. Help texts
  30. Using the Favourites menu
  31. Editing the values
  33. Menu structure
  34. Quick setup
  35. VACON ® Live
  36. Monitoring menu
  37. Trend curve
  38. Basic
  39. Temperature inputs
  40. Extras and advanced
  41. Timer functions monitoring
  42. PID controller monitoring
  43. External PID controller monitoring
  44. Fieldbus process data monitoring
  45. Parameters menu
  46. Group 3.2: Start/stop setup
  47. Group 3.3: References
  48. Group 3.4: Ramps and brakes setup
  49. Group 3.5: I/O configuration
  50. Group 3.6: Fieldbus data mapping
  51. Group 3.7: Prohibit frequencies
  52. Group 3.8: Supervisions
  53. Group 3.9: Protections
  54. Group 3.10: Automatic reset
  55. Group 3.11: Application settings
  56. Group 3.12: Timer functions
  57. Group 3.13: PID controller
  58. Group 3.14: External PID controller
  59. Group 3.15: Multi-pump
  60. Group 3.16: Maintenance counters
  61. Group 3.17: Fire mode
  62. Group 3.18: Motor preheat parameters
  63. Group 3.19: Drive customizer
  64. Group 3.21: Pump control
  65. Group 3.22: Advanced harmonic filter
  66. Diagnostics menu
  67. Trip counters
  68. Software info
  69. I/O and hardware menu
  70. Option board slots
  71. Real time clock
  72. Keypad
  73. User settings, favourites and user level menus
  74. Parameter backup
  75. Adding an item to the Favourites
  76. User levels
  77. Changing the access code of the user levels
  78. Monitoring value descriptions
  82. Timer functions
  83. PID controller
  84. External PID controller
  85. Maintenance counters
  86. Parameter descriptions
  87. Motor settings
  88. Motor control parameters
  89. Motor limits
  90. Open loop parameters
  91. I/f start function
  92. Torque stabilator function
  93. Start/Stop setup
  94. References
  95. Torque reference
  96. Torque control in Open loop control
  97. Motor potentiometer parameters
  98. Joystick parameters
  99. Jogging parameters
  100. Ramps and brakes setup
  101. Ramp 2
  102. Start magnetising
  103. DC brake
  104. Default functions of programmable inputs
  105. Analogue inputs
  106. Digital outputs
  107. Analogue outputs
  108. Fieldbus data map
  109. Prohibit frequencies
  110. Supervisions
  111. Motor thermal protections
  112. Motor stall protection
  113. Underload protection
  114. Quick stop
  115. Temperature input fault
  116. AI low protection
  117. User-defined fault 1
  118. Application settings
  121. Setpoints
  122. Feedback
  123. Sleep function
  124. Feedback supervision
  125. Pressure loss compensation
  126. Soft fill
  127. Input pressure supervision
  128. Frost protection
  130. Multi-pump function
  131. Overpressure supervision
  133. Fire mode
  134. Motor preheat function
  135. Drive customizer
  136. Pump control
  137. Jockey pump
  138. Priming pump
  139. Fault tracing
  140. Resetting with a parameter in the text display
  141. Fault history
  142. Examining the Fault history in the text display
  143. Fault codes
  144. Total and trip counters
  145. Run time counter
  146. Energy counter
  147. Energy trip counter
  148. Appendix 1
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
Table of contents
  1. Table Of Contents
  2. Safety
  3. Warnings
  4. Earthing and earth fault protection
  5. Modbus - general info
  6. Modbus technical data
  7. Modbus installation
  8. Prepare for use through ethernet
  9. Programming
  10. Modbus TCP parameters and monitoring values
  11. Modbus RTU parameter descriptions
  12. Modbus TCP parameter descriptions
  13. Modbus TCP monitoring values
  14. Communications
  15. Modbus data mapping
  16. Fault tracing
  17. Other fault conditions
  18. Quick setup
  19. Annex
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Safety
  3. Warnings
  4. Earthing and earth fault protection
  5. EtherNet/IP - General info
  6. Ethernet installation
  7. Prepare for use through Ethernet
  8. Commissioning
  9. Parameters
  10. Output Instance
  11. Programming
  12. Communications
  13. Explicit Messaging
  14. CIP Common Required Objects
  15. Objects Present in an AC/DC Drive
  16. Vendor Specific Objects
  17. ODVA I/O Assembly instances for AC/DC Drive
  18. Vendor-specific I/O Assembly Instances
  19. Mapping of Standard Output Assemblies onto Vacon data
  20. Mapping of Vacon data onto Standard Input Assemblies
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: Controller
Table of contents
  1. Table Of Contents
  2. Safety
  3. Warnings
  4. Earthing and earth fault protection
  5. BACnet - general info
  6. BACnet technical data
  7. Programming
  8. BACnet IP parameters and monitoring values
  9. BACnet MS/TP parameter descriptions
  10. BACnet MS/TP monitoring values
  11. BACnet IP parameter descriptions
  12. BACnet IP settings
  13. BACnet IP monitoring values
  14. Installation
  15. Prepare for use through RS485
  16. Prepare for use through Ethernet
  18. Communications
  19. Binary Value Object
  20. Analogue Value Object
  21. Control word bits
  22. Fault tracing
  23. Other fault conditions
  24. Quick setup
  25. Annex - Protocol implementation conformance statement
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
100 INDUSTRIAL first page preview

100 INDUSTRIAL

Brand: Vacon | Category: DC Drives
Related products
100 HVAC100 flow100 Series10100X seriesNX_ 0100 6NXP 1030 5NX_ 0300 2NX_ 0300 5IP5-FR7-G3
Vacon categories
Water Filtration Systems
Controller
Industrial Equipment
Media Converter
DC Drives
Inverter
Power Supply
I/O Systems
Computer Hardware
Remote Control
More Vacon categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine