Azbil Corporation Maintenance and TroubleshootingModel MGG10C/14C - MagneW FLEX+/PLUS+ Converter 5-9Simulated signal by the calibratorThe model MGZ14 calibrator and the model F1X calibrator are available for thisconverter. The calibrator inputs the simulated signal to the converter. By using thecalibrator, the converter function can be checked.PreparationCalibrator and cablesDigital voltmeterResister (250W)Check the converter by following the user’s manual of the calibrator.CM2-MGZ100-2001 for the model MGZ14. CM2-F1X100-2001 for the model F1X.CAUTIONIn case using the MGZ calibrator of the S/W version 1.6 or earlier with theconverter of the model code MGG10C-M_ _ _- _ _ _ _ -_ ,MGG14C-M_ _ _- _ _ _ _ -_, make sure to connect cables of the MGZ calibratorto the connectors as indicated in the below drawings. If not, the calibrator may notwork properly..In case the X,Y cable from the detector is not connected together with the X,Ycable of the MGZ calibrator, upgrade the S/W version of MGZ from the currentversion to 1.7 or later version.
