Azbil Corporation Using the display panelModel MGG10C/14C - MagneW FLEX+/PLUS+ Converter 4-25Selecting functionsIntroductionSets the electromagnetic flowmeter functions: range, counter, contact input, andcontact output.There will be restrictions on the functions that can be set depending on your model’sspecifications. Note that the setting range will be limited depending on the selectionof contact input/output.The possible combinations are shown on the following pages.Step Screen Procedure(English) (Japanese)1 FUNC SET FOA11 FOA11 Enter ENGINEERING MODE(see page 4-23).2 FUNC SET FOA11SINGLE RANGEFOA11Touch the key to select thekind of function settings.1st character is for range setting,2nd is for built-in counter setting,3rd is for contact input functionsetting and 4th is for contactoutput function setting.3 FUNC SET F1A12DIR AUTO DUAL RGF1A12 Touch the or key to selectthe desired function.4 FUNC SET FOB13PRESET COUNTERFOB13Two touches of the key instep 1 enables the selection ofthe built-in counter function.Touch the or key to selectthe desired function.5 FUNC SET F0A21EXT AUTO ZEROFOA21Three touches of the key instep 1 enables the selection ofthe contact input function.Touch the or key to selectthe desired function.6 FUNC SET FOA14ERROR DIAG ALMFOA14Four touches of the key instep 1 enables the selection ofthe contact output function.Touche the or key toselect the desired function.
