Azbil Corporation IntroductionModel MGG10C/14C - MagneW FLEX+/PLUS+ Converter 1-9The converter consists of the components shown in the figure below.ADBCFigure 1-7 Parts of the converterConverter• Converts electromotive force by the detector to the flow rate signal.• Transmits the analog output or the digital output as the flow rate signal.Data setting device (A)• Displays the flow rate and the totalized value.• The Data can be configured through the four infrared sensor keys.Terminal box (B)• Encloses the inputs/outputs terminals.• Equipped with lightning arrestor.Name plate (C)• Indicates model numbers, product numbers and the detector factor (EX).Tag number plate (D)• Indicates the tag number as specified in the product order.CAUTIONDo not apply over-voltage that exceed following lightning arrestor specification.The converter may be damaged.• Power supply terminal: series mode 1kV, common mode 2kV• Input/Output terminal: series mode 1kv, common mode 1kV
