Azbil Corporation Using the display panelModel MGG10C/14C - MagneW FLEX+/PLUS+ Converter 4-17Flow counter - ResettingThis function resets the current totalized value and saves it to memory. (The defaultvalue for the counter is 000000000 at power-up.)Step Screen Procedure(English) (Japanese)1 CNT-RESET READYPREV 0000000000Enter BASIC SETUP MODE(see page 4-11). (The firstscreen in this mode is always theTAG screen.)Use the or key to cyclethrough the screens until theCNT-RESET screen appears.2 CNT-RESET READYPREV 0000000000Touch the key once to movethe cursor to READY.3Touch the key to selectREADY and reset the counter.READY changes to ON as thecounter resets and then changesback to READY when it’s done.4 CNT-RESET ONPREV 0000123456Touch the key until thecursor is back at the modeindicator.Touch the MODEkey and hold for three secondsto return to MEASUREMENTMODE to save the new value.
