Azbil Corporation Using the display panelModel MGG10C/14C - MagneW FLEX+/PLUS+ Converter 4-11Entering BASIC SETUP MODEThe following screens appear in this order in BASIC SETUP MODE.Step Screen Procedure(English) (Japanese)1 10.0 m3/hWPO 0000000020Left display is an example ofMEASURING MODE.Touch MODE key and holdfor three seconds. The BASICSETUP MODE ENTER screenappears.2ENTER BASIC SETUPYES OR NOiENTER BASIC SETUPYES OR NOiMake sure to operate thefollowing within 8 seconds.If no operation is donein 8 seconds, the screenautomatically returns to theMEASURING MODE.1) In case of entering BASICSETUP MODETouch the key twice to movethe cursor to YES. Touch thekey once.2) In case of back toMEASURING MODETouch the key three times tomove the cursor to NO. Touchthe key once.3 BASIC SETUPMODEWith the operation of 1), theBASIC SETUP MODE screenappears for two seconds.4 TAGXXXXXXXXTAG setting screen appears twoseconds after.
