Model MGG10C/14C - MagneW FLEX+/PLUS+ Converter 2-1Chapter 2: InstallationThis chapter describes the installation and wiring procedures for the flowmeter.WARNINGELECTRIC SHOCK HAZARD! DO NOT perform wiring work while the poweris ON!Site selectionWhen selecting an installation site for the flowmeter, observe the following safetymeasures:CAUTIONInstall the flowmeter in a location with an ambient temperature of -25 °C to60 °C (-13 °F to 140 °F) and an ambient humidity of 5 to 100% RH to preventequipment malfunction or output errors.CAUTIONDo not install the flowmeter near high-current power lines, motors or transformersto prevent damage from electromagnetic induction, which can cause equipmentmalfunction or output errors.CAUTIONBe sure to ground the welding power transformer when welding near theflowmeter to avoid output errors.CAUTIONDO NOT use the flowmeter to ground a welder. It can damage the flowmeter.CAUTIONDo not install the flowmeter on the bridge or deck of the ship.
