Introduction Azbil Corporation1-10 Model MGG10C/14C - MagneW FLEX+/PLUS+ ConverterApproval of this DeviceOverviewIf the basic model number is MGG14C and 1/2 NPT wiring connection is selectedand style code is selected as “N”, this device functions as an FM, non-incentive-approved model. In this case, the installation standards described in this section mustbe followed.Installation of this deviceFM Nonincendive modelTHIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DIVISION 2,GROUPS(A, B, C, D), CLASS II/III, DIVISION 2, GROUPS (F, G), OR NON-HAZARDOUS LOCATIONS ONLY.CAUTION• Power supply and internal voltage of ordinary equipment to the earth shall notexceed AC250V 50/60HZ, DC250V in case of normal /formal conditions.• Ambient temperature is from - 25 to 60C• Process temperature is from -40 to 160C (Remote model).• Process temperature is from -40 to 120C (Integral model)
