manuals
database
Your AI-powered manual search engine
Search
Home
Brands
Azbil
Media Converter
MagneW FLEX+/PLUS+ MGG10C
Azbil MagneW FLEX+/PLUS+ MGG10C User Manual
Print this manual
Download
Azbil MagneW FLEX+/PLUS+ MGG10C User Manual
Table of content
Contents
about this manual
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Main components
Figure 1-2 Remote System
Analog output and digital output
System configuration WITHOUT the communication function
System configuration WITH the HART communication function with the internal power supply
System configuration WITH the SFC or HART communication function with the external power supply
System Configuration for Digital Output (DE Output)
Figure 1-7 Parts of the converter
Approval of this Device
Figure 1-8 System configuration
Site selection
Unpacking and storage
Installation options
Changing the orientation of the converter
Wiring
Integral wiring - 1 (1-contact input and 1- contact output)
Integral wiring - 2 (2-contact input)
Integral wiring - 3 (2-contact output)
Remote wiring - 1 (1-contact input and 1- contact output)
Remote wiring - 2 (2-contact input)
Remote wiring - 3 (2-contact output)
Grounding
Figure 2-11 Signal Cable Dimensions
Signal and excitation cable wiring
Wiring cable
Figure 2-16 Wiring diagram for pulse output
Figure 2-18 Wiring diagram for contact input
Setting write protection
Figure 2-20 Switch locations on main card
Setting the communication via the HART
Setting the empty detection function
Setting the communication via the SFC
Connecting power
Start-up
Using the display panel
Using the infrared touch sensor keys
Table 3-1 Touch Sensor key Functions
Table 3-2 Default settings
About modes
Table 4-1 Mode functions
MEASURING MODE
LCD display flow
Entering BASIC SETUP MODE
Default setting
Damping time constant
Auto zero
Flow counter - Reset value
Flow counter - Resetting
Detector data
Setting the Number of Dummy Detectors
Flow rate range
Flow rate indication
Entering ENGINEERING / ADVANCED / MAINTENANCE MODE
Entering MAINTENANCE MODE
Selecting functions
Relations for setting function FXXXX
Range functions
Normal direction automatic dual range
Normal direction, external switching dual range
Normal/reverse automatic switching range
Built-in counter function]
Contact input function]
Contact output function]
Figure 4-4 2-stage flow rate alarm output
Setting hysteresis
Selecting the current output method for dual range
Setting / Changing the preset value of the built-in flow counter
Specific gravity
Pulse weight
Setting the pulse width
Setting high and low limit alarms
Setting a 2-stage flow rate alarm
Selecting fail-safe mode for the analog output
Selecting fail-safe mode for the pulse output
Setting the contact output status
Manual zeroing
Setting moving average
Auto spike cut function
Manual spike cut function
Coefficient of compensation
Setting the drop-out
Setting the low flow cut
Setting decimal place
Change the excitation frequency
Setting the analog output limit
Change the flow direction
Error history check/clear
troubleshooting
Function check
Analog output check
Pulse output check
Contact input/output loop check
maintenance and troubleshooting
Excitation current check
Simulated signal by the calibrator
Troubleshooting
Errors at startup
Operation errors
Error messages
Error codes for non-critical problems
Safety precautions
Structure and functions of SFC
Azbil Corporation
Using the display panel
Model MGG10C/14C - MagneW
FLEX+/PLUS+
Converter
4-5
LCD display flow
The following screens appear in this order.
than 3 seconds.
Move the cursor under YES
by using
key and press
key.
(to be continued)
Previous
Next
/ 146
Zoom view
Related manuals for Azbil MagneW FLEX+/PLUS+ MGG10C
Azbil RN748 User Manual
Azbil KUX60G User Manual
Azbil KUX113 User Manual
Azbil RYY792 Series Specifications & Instructions
Azbil RYY792 Series Specifications And Instructions
This manual is suitable for:
MagneW FLEX+/PLUS+ MGG10C
MagneW Plus+ MGG14C
manuals
database
Your AI-powered manual search engine
