Azbil Corporation InstallationModel MGG10C/14C - MagneW FLEX+/PLUS+ Converter 2-21Setting the communication via the HARTTo check the communication switch position on the main card:1. Remove the four screws holding the display cover to the main body of theconverter and remove the cover.2. Locate the communication switchEmpty detection function switchWriteprotectionswitchMain cardCommunicationswitchFigure 2-22 Switch locations on main card3. Make sure that position of the I switch (1-4) are ON and positions of the SFCswitch (5-8) are OFF.OFF ON5 6 7 8I SFCF S KO F F(Move the switches to the white positions)Figure 2-23 HART communication switch positions~ Note Refer to the Figure 2-15 Wiring diagram for current output for the wiring
