Using the display panel Azbil Corporation4-2 Model MGG10C/14C - MagneW FLEX+/PLUS+ ConverterThe following table describes the functions available in each mode.Table 4-1 Mode functionsMode DescriptionMEASURING MODEThis is the normal operational mode and indicates themeasuring status.Each time the MEASURING MODE is selected,data is written into memory. Settings entered inother modes are held in temporary memory for twominutes, but will return to the previously saved valueunless the MEASURING MODE is selected to savethe data. The only exception is the counter, which isalways saved into memory immediately.BASIC SETUP MODEMode indicator:This mode is used to change data settings that mustbe recorded or changed frequently. These settingsinclude:TAG NO.Damping time constantDisplay selectAuto zeroFlow rate rangeDetector dataBuilt -in counter reset/presetENGINEERING MODEMode indicator:This mode is used to change data settings that areused less frequently. These settings include:Function settingFlow rate rangePulse dataFail safe mode settingMAINTENANCE MODEMode indicator:This mode is used when adjustment or verificationis required for regular maintenance of the systemor when troubleshooting the system. This modeincludes:Shipping informationOutput adjustmentGain adjustmentThis mode is further divided into the following twomodes:OUTPUT CHECK MODECALIBRATION MODE
