CHAPTER 1 - SYSTEM OPERATIONLSM 880 Left Tool Area and Hardware Control Tools ZEISS10/2014 V_01 000000-2071-464 157Select the timer configuration from theConfigurations list by highlighting it or search forit by typing its name in the Search field. The Infowindow pops up (Fig. 216).Press Yes to delete the configuration, No to keepthe configuration.To save a configuration press the Save button(symbolized by the disc icon). This opens the Savecurrent timer configuration as panel (Fig. 217).Type in an appropriate name in the Configurationfield and press Ok to save the configuration in thedata base or press Cancel to abort the process.The delay time can be changed while scanning.5.2.19.2 MarkerExpand the Marker field by clicking the triangle(Fig. 218). The Marker functionality provides thepossibility to indicate the start or end of anexternal process in the data of the image series byconnecting this external process to the selectedTrigger In for that Marker. Up to 4 differenttriggers can be selected from the Trigger In pulldown menu. You can edit a description of thatmarker in the Description box of the Marker,which will be visible in the image data using theMean ROI functionality or the image gallery displaymode. A Trigger Out signal can be set with eachdefined marker. Up to 4 different triggers can beselected from the pull down menu. By clicking Seta marker is set manually at any time duringscanning. A maximum of seven different markerscan be defined using the + button. The – buttondeletes the currently highlighted marker.Fig. 219 MarkerYou can load a predefined timer configuration from the Marker field by pressing the Load button(symbolized by the folder icon) (Fig. 219).Fig. 216 Delete information windowFig. 217 Save current timer configurationas windowFig. 218 Time Series tool – Marker
