CHAPTER 1 - SYSTEM OPERATIONZEISS Left Tool Area and Hardware Control Tools LSM 880290 000000-2071-464 10/2014 V_015.3.21.9 PrintClick on the Print tab to activate the Print Diagrams display mode (Fig. 387).The Print Diagrams window shows an overview of the results presented in tables and / or graphs, andrelevant measuring parameters. This result overview can be printed directly on a connected printer.In the Print Diagrams the following print functions can be selected by pressing the correspondingbutton:Print: Starts the print function.Printer Setup: Opens the printer setup window to set the print parameters.(1) AmountCompressed: Selects the Compressed Report preview without diagrams.Standard: Selects the Standard Report preview with correlation and fit curves.Full: Selects the Full Report preview with all diagrams and tables.(2) Data setsAll: Prints all measurements.Selection: Prints all selected / highlighted measurements.Current: Prints the last selected / highlighted measurement only.To print a report, proceed as follows:• Select the Compressed, Standard or Full button.• Select the All, Selection or Current button.• If required, change the printer settings using the Printer Setup button.• Click on Print to start the print procedure.
