CHAPTER 1 - SYSTEM OPERATIONLSM 880 Center Screen Area / Image Containers - Display and Image Analysis ZEISS10/2014 V_01 000000-2071-464 427(5) Dimensions – PositionsWhen clicking Positions a crosshair will be displayed at the cursor position in the image. With a mouseclick the position of the crosshair in the image will be added to the Positions list in the Stage tool and thePositions tool.(6) Dimensions – StageStage will show the cursor as a rectangle with a crosshair in the centre. With a mouse click the stage (andtherefore the sample itself) will be repositioned. The image position with the cross hair will become thecentre position of the stage and therefore the centre position of a next image6.2.2 DisplayIn the Display View Option control block, theintensity minimum can set to the Black value andthe intensity maximum to the White value of theimage using the button.Clicking on the button sets the intensityminimum to Black and percentile value and theintensity maximum to White and percentile value.Activating the check box sets the intensityminimum and maximum values automatically.With the spin-boxes you can set the lowerand upper percentile values.The Black, the Gamma and the White values of the displayed image can be adjusted (Fig. 603)individually.With the buttons, the effect of the settings can be restricted to an individualchannel or be applied to all channels. By default, the settings apply to all channels simultaneously.The parameters can be changed using the spin-boxes – or directly by typing in numbers in the number-field. With the button, the original settings are easily re-set.The settings in this View control block apply only to the Image Display and are NOT changed in theoriginal data set. To write the changed settings to the image data set, use the Burn in Brightness andContrast function in the Processing tab (section Processing Tab).Fig. 603 View Options control block -Display
