CHAPTER 1 - SYSTEM OPERATIONZEISS Left Tool Area and Hardware Control Tools LSM 880278 000000-2071-464 10/2014 V_01• Choosing Abscissa logarithmic or Ordinate logarithmic will display the abscissa or ordinate in alogarithmic scaling.• The line width allows you to select the thickness of the graph. 6 settings are possible.With the ordinate set to a logarithmic scale all zero frequencies will be displayed as vertical tabs,since the log0 goes to infinity low values.5.3.21.6 Saving Correlation ResultsYou can save correlation data in the File menu ofthe menu bar.(1) Save and Save as• Save will save the data in .fcs format and willoverwrite an older version. This function is alsoavailable in the Images and Documentscolumn (Fig. 371) by pressing the disc button.• Save as allows you to save the whole data set(curves, fitting results, fit parameters, raw data)to a disk. If Save as is pressed you will have thechoice between FCS data files (.fcs) withoutraw data or FCS files with raw data (.fcs)attached by selecting the appropriate settingsfrom the pull-down menu (Fig. 372).Note that raw data are only available, if theFCS files with raw data was selected.The Save FCS menu offers the possibility ofentering a file name in the Name field and tochoose an appropriate Directory.Note that it is only possible to store the dataas ANSI text. Binary file formats of previousreleases are no longer available.If raw data were saved along with the FCS file, the raw data of each single measurement channelwill be stored attached to the .fcs file. .raw files will bear the same name than the .fcs file withname extensions, which identify the repetition and the channels.You can enter a sample comment in the Sample Comment display box by typing. This commentwill be saved along with the data.Fig. 371 Open images columnFig. 372 Save Raw Data window
