Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

187Chapter 7 Calculation, Analysis, and Output of Inspection Results7.3.5 Saving a Conditional Formula for Save ImageWhen the conditional formula saved here was judged as "NG", the image is saved. Only the Judgment formulasthat have already been created can be saved as a conditional formula for Save Image. Follow the instructionsbelow to save a conditional formula for Save Image while the Judgment menu is open.1. Press the B key while the cursor is on a Judgmentnumber.The subwindow is displayed.2. Select "Save Image".The subwindow is displayed.3. Highlight "JD".The cursor moves to the number right next to “JD”.4. Specify a Judgment number to save as a conditionalformula.Now you finished saving the formula.If “ENVIRONMENT” >”Save Image Mode” > “Save Image” > "Judge.Result" from the menu bar is selected, the memory image of which conditional formula was judged as "NG"will be stored in the PV310.Conditional Formula for Save Image in Automatic Switch or User-Defined ModeThe setting conditions differ upon the mode. This is because the Judgment No. to be executed is also differentdepending on the mode.ConditionExecutionmode The number ofjudgment thatcan be setDetailsSetting screen Example screen display forJudgmentExecute All One One for each ofthe followingrange:JD01 - JD96AutomaticSwitchTwo One for each ofthe followingranges:JD33 - JD64,JD65 - JD96Setting values for blocks 3 and 2(from the right column)User-Defined Three One for each ofthe followingrages:JD01 - JD32JD33 - JD64JD65 - JD96Setting values for blocks 3, 2 and1 (from the right column)“---“: UnsetIf you switch the execution modes, the saved data of Total Judgment are erased. In this case, you must save thesame data as the erased data again.Refer to page 225 for more details of settings of image saving.