328General SpecificationsChapter 17Standard Camera ANM832Item SpecificationImaging element Interline transfer method. 1/3 inch CCD fixed photo elementsEffective pixels Horizontal 768 x vertical 494 pixelsScanning method 1/2 interlaceAccumulation method FrameShutter speed OFF (1/30), 1/100, 1/250, 1/500, 1/1000, 1/20001/4000, 1/10000s (Controller was used for setting a shutter speed.)Sync method External / InternalLens mount CS mountRated voltage/Operatingvoltage range12V DC (supplied from the controller) /10.8 to 13.2V DCConsumed current 140 mA or lessOperating temperaturerangePerformance guarantee temperature range: 0°C to +40°C (without icing and dewcondensation)Storage temperature -30°C to +60°C (without icing and dew condensation)Operating humidity range 35% RH to 85% RH (without icing and dew condensation at 25°C)Storage humidity 85 % RH (without icing and dew condensation at 25°C)Vibration resistance 10 Hz to 55 Hz, 1 sweep per minute, amplitude 1.2 mm, 30 minutes in each X, Y and ZdirectionsJolt resistance 700m/s 2 , 3 times each in X, Y and Z directionsWeight Approx. 300g (without camera cables, lenses and a camera mounting plate)Length of camera cable Approx. 3m