Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

254Parallel Communication Chapter 10Timing ChartArea Display: No (When "Template Setting" is assigned to FCT2.)1. Assign the numbers of the target checkers to re-register to IN1-7.(Input the data more than 1 ms before FCT2 signal input).2. Make sure that READY signal and input FCT1 signal.After READY signal is turned off, the template is re-registered.3. Make sure that the READY signal is off and then turn the FCT2 signal off.After re-registering the template is completed, the READY signal is turned on.• You cannot re-register the templates of the following checkers by inputting a signal from the externaldevice.- Position Adjustment (Matching)- Rotation Adjustment (Matching)- Rotation Adjustment (Contour)• If the image cannot be re-registered or the image has no features), ERROR signal will be output.• If the external device cannot recognize that READY signal has been recovered (OFF > ON) due to shortproduct switch time, set Min. Ready Off time by selecting “ENVIRONMENT” > “Initial Settings” from themenu bar.• When a live image is displayed, a new image is re-registered after capturing the image.• When a memory image is displayed, the currently displayed memory image (captured last) isre-registered.• If you do not want to let the PV310 lose the images after power is removed, save the current settings byselecting "SAVE" from the menu bar or by inputting the command "%MCR" from the external device.