Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

206Chapter 8 TOOL8.5.1 Selecting an Display ImageThere are three types available for displaying images.No. Settings Setting Item1 To select a memory image to displayMemory 1 (C1), Memory 2 (C2), Memory 1+22 To select live image or memory image(A live image is a current image. The image changes in real time. Forexample, if you covered the lens surface with your hands, a blackenimage is captured.)Display Camera Image3 To select gray image or binary image (groups A through H) Display Gray Value/BinaryOnly the last saved image can be also displayed when inspection is executed. Refer to page 229 for details.Switching the Display Camera Image1. Select “TOOL” > “RUN Mode Image Settings”.2. Select “Display Camera Image”.The Display Camera Image menu is displayed.Option Image to be displayedLive – C1 Live image of Camera 1 (real-time image)Live – C2 Live image of Camera 2 (real-time image)Live-C1+C2 Live image of Camera 1 and Camera 2 (real-time image)Memory-C1 Memory image of Camera 1(still image for inspection)Memory-C2 Memory image of Camera 2 (still image for inspection)Memory-C1+C2 Camera 1 and Camera 2 (still image for inspectionexecution)3. Move the cursor to the image to be changed and press the ENTER key.• When you display a live image, it takes longer time to capture an image. It is advisable to display thememory image(s) of Memory 1 and/or Memory2 when you executing inspection.• When inspection is executed using the image save function while the last saved image is displayed," selectMemory-C1 or Memory-C2.