Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

236Environment Settings Chapter 99.4.3 Setting Name of Image Save File1. Select “ENVIRONMENT” > “Image Output Settings” from the menu bar, and select “File Name” tab> “Header”.Set a header in a (fixed) file name. Default value is “Image”.2. Create a header of less than 16 letters using the soft keyboard.In the example shown below, the header is set to “TEST”. If you cleared the header in the file name byclicking the BS button and clicked the Enter key, the number of digits of the header becomes 0.3. Select “Additional Information 1”.You can add up to four types of Additional Information (1-4) after the header in a file name.• Year-Month-Day:yyyymmdd• Time-Minute-Second:hhmmss• Total Judg.: OK or NG• Type number: nn• If the Compact Flash memory card does not have enough storage capacity to save the setting or imagedata, no more images are saved. A message saying you failed to save the image is not displayed or nosignals are output.• Once you output an image, you cannot restore it to the PV310 by selecting “CARD” >”Restore”, but thefollowings are exceptions.When restoring theimage to an image savearea1. Change the file name as follows:Image00 nn mImage00: Fixed, nn: 01 - 16 (Image No.), m: 1 or 2 (Camera No.)2. Store the image in the following folder in the Compact Flash memorycardPanasonic MEW Vision\PV310\ Image\Image NN (NN = 01-99)When restoring theimage as a memoryimage1. Change the file name as follows:Image captured by Camera 1: Image00001.bmpImage captured by Camera 2: Image00002.bmp2. Store the image in the following folder in the Compact Flash memorycard.Panasonic MEW Vision\PV310\ Image\Image NN (NN = 01-99)