Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

227Environment Settings Chapter 99.3.3 Saving an Image per InspectionWhenever the camera captures a new image, the PV310 saves it, but the maximum number of images that canbe stored in a memory is 16 pairs of images per memory. (When the number of images reaches the largestnumber, see page 228.)Setting Procedure1. Select "Save Image Mode" from the ENVIRONMENTmenu.The submenu is displayed.2. Select "Save Image".The subwindow appears.3. Highlight "Per Start".Now you complete the setting for saving an image perinspection.9.3.4 Saving the Images of Which the Conditional Formula Was Judged as NGDuring the execution of inspection, the image of which the conditional formula for “Image Save” was judged as"NG" is saved. But, this function is effective only if a Numeric Calculation formula has been saved as a conditionalformula for “Image Save”. The number of the images that can be stored in the PV310 is up to 16 pairs of images.Setting Procedure1. Select "Save Image Mode" from the ENVIRONMENTmenu.The submenu is displayed.2. Select "Save Image".The subwindow appears.3. Highlight "Judg. Result".Now you completed the setting for saving images duringinspection.Registering Conditional Formulas to save images: Page 187