Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

17Installation and WiringChapter 22.2 Installation of PV3102.2.1 Countermeasure for Heat RadiationInstall the PV310 in the correct direction (see the figures below) for heat radiation not to block the ventilator. Donot mount the unit sideways. It might cause a malfunction due to the internal heat retaining.Do not mount above the high heat generators including a heater, a transformer and a high-capacity resistor.When installing PV310 on a control board, attach a cooling system such as a fan motor to release the heatgenerated by PV310.Correct Wrong2.2.2 About Mounting SpaceKeep 50 mm or more space from other equipment to facilitate the unit exchange and cable wiring.When mounting a device in front of the PV310 (on the door of the control box, etc.) keep 100 mm or more spacebetween them in order to prevent an impact from noise radiation or heating.Always keep 100 mm or more space from front of the PV310 to facilitate a keypad connection or a wiring.