Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

196Chapter 7 Calculation, Analysis, and Output of Inspection Results7.5.5 Changing the Number of Rows and ColumnsWith this feature, you can specify the number of rows and columns in the Data Monitor table to be displayed. Thenumber of data to be displayed in the Data Monitor table differs depending on the specified number of rows andcolumns.1. Select “TOOL” >”RUN Mode Image Settings”from the menu bar.The subwindow is displayed.2. Highlight “Number of Rows” and specify thenumber of rows within the range between 1 and10.The specified number of rows is added below the leftupper cell. For example if you choose “1”, only thetop (first) row is displayed.3. Select “Number of Columns” and specify the number of columns within the range between 1 and 5.The specified number of columns is added. If you choose “3”, only three columns from the left aredisplayed.The specified number of columns isdisplayed.→The desirednumber ofrows isdisplayed.↓Example Data Monitor table:If the number of rows = 1 and the number of columns = 3,Three columns aredisplayed.↓The othercolumns arenot displayed↓Actual display↓One row is displayed. Æ TYPE CA01CA02CA03QS00TYPE CA01The other rows are notdisplayed. Æ