Cabletron Systems SmartSwitch 9W006 User Manual
Also see for SmartSwitch 9W006: User guideRelease noteQuick start
                                                                                                                                                                                                                                                                                            | |
Contents
|
USER’S GUIDE190 SmartSwitch Remote Access ModuleModem TypeYou must change the modem type from the default of “Direct Connect” to your modem’s brandname. To make this change, enter a menu selection of “C” (for Modem Type). A list of modem typeswill be displayed. Arrow down to the type of modem you have installed. If the type of modem youhave installed is not included on the list, select Hayes Smartmodem.You will then be asked if you want to use the Modem’s default baud rate. Answer either yes or noby entering Y or N.Baud RateIf you wish to enter a new baud rate, enter a menu selection of “B “(for Baud Rate). Continue topress B until the baud rate you desire is displayed.When you have finished making Carbon Copy configuration parameter changes, enter a menuselection of “X” to save your changes and exit the CCINSTAL program. You will be asked if youwish to update the presently running Carbon Copy. Enter “Y” for yes. Carbon Copy will then bereinitialized and you will be returned to the MSDOS prompt.USAGE I NSTRUCTIONSE STABLISHING A R EMOTE A DMINISTRATION S ESSIONWhen using the remote administration console option, Carbon Copy establishes an administrationsession with the SmartSwitch Remote Access Module. This section contains a brief description ofestablishing an administration session using Carbon Copy.1. If you did not install the Manager software onto the administration console PC (see UpgradingSystem Software) then insert the Manager software diskette into the diskette drive on theadministration console PC.2. Set the administration console PC to the disk drive containing the Manager software (replace“drive letter” with the appropriate administration console PC drive, for example, “A” or “C”).Type: |
Related manuals for Cabletron Systems SmartSwitch 9W006
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine