USER’S GUIDE262 SmartSwitch Remote Access ModuleL AYER 1 GENERAL STATISTICSNote: Layer 1 general statistics apply to the indicated slot.InterruptsThe number of hardware interrupts received from the layer 1 hardware device.Forced ResynchsThe number of times layer 1 has attempted to manually synchronize to the incoming signal.Unknown EventsIf this counter is ever non-zero, call Customer Support Personnel.Unused EventsIf this counter is ever non-zero, call Customer Support Personnel.Unknown MailIf this counter is ever non-zero, call Customer Support Personnel.Wrong StateIf this counter is ever non-zero, call Customer Support Personnel.WAN S TATISTICSYou can access WAN statistics by issuing thewan stats console command.data link upA counter that is incremented every time a data link comes up.data link downA counter that is incremented each time a data link goes down.switched call initiatedA counter that is incremented for each attempt to make a switched call.switched call completedA counter that is incremented each time a switched call successfully completes and passesidentification.switched call retryA counter that is incremented for each retry of an original switched call attempt.switched call not possibleA counter that is incremented each time a switched call needs to be made to a site and it is notpossible.connection request failureA counter that is incremented each time a connection is requested and no response has beenreceived after a connection request failure period of time.
