USER’S GUIDE6 SmartSwitch Remote Access ModuleConfiguration Overview 35Overview 35SFVRA Configuration Manager 36Starting the SFVRA-CFG Application 36CFGEDIT 37Executing CFGEDIT 37Saving CFGEDIT Changes 37Dynamic Management 38Executing Dynamic Management 38Utility Dynamic Management Commands 38Saving Dynamic Management Changes 39S YSTEM I NSTALLATION 40Ordering PRI ISDN Service (US Only) 41Hardware Installation 43Overview 43Installing the SmartSwitch Remote Access Module 43Unpacking the SmartSwitch Remote Access Module 43Installation 44Connecting the Module’s Cabling 44Module to SmartSwitch 9000 Ethernet Cabling 45Mod-Tap Adapter 45Module to PRI Service Cabling 45Restarting the SmartSwitch Remote Access Module 46Accessing the SmartSwitch Remote Access Module 47Overview 47Accessing a New Module 47Initial Assess Using a PC and a Terminal Application 47Initial Access Using Telnet 47Establishing an Administration Session 48Assigning the Module’s IP Address 48Accessing the Release Notes 49Remote Access using Telnet 49Upgrading System Software 50Overview 50Telnet Connection 50Upgrading Software 50Accessing the Release Notes 51T ROUBLESHOOTING 52System Verification 53Overview 53Verifying Hardware Resources are Operational 53Verifying WAN Lines are Available for Use 54
