9W006 and 9W007 255SYSTEM S TATISTICSSNMP StatisticsSNMP S TATISTICSIf the SNMP Agent is enabled, you can access SNMP statistics by using thesnmp statscommand. Each of the following statistics are counters that refer to an MIB-2 SNMP group object.snmpInPktsThe total number of messages delivered to the SNMP Agent from the transport service.snmpOutPktsThe total number of SNMP messages that were passed from the SNMP Agent to the transportservice.snmpInBadVersionsThe total number of SNMP messages that were delivered to the SNMP Agent and were for anunsupported SNMP version.snmpInBadCommunityNamesThe total number of SNMP messages delivered to the SNMP Agent that used an SNMP communityname not known to said system.snmpInBadCommunityUsesThe total number of SNMP messages delivered to the SNMP Agent that represented an SNMPoperation that was not allowed by the SNMP community named in the message.snmpInASNParseErrsThe total number of ASN.1 or BER errors encountered by the SNMP Agent when decoding receivedSNMP messages.snmpInTooBigsThe total number of SNMP PDUs that were delivered to the SNMP Agent and for which the valueof the error-status field is “tooBig”.snmpInNoSuchNamesThe total number of SNMP PDUs that were delivered to the SNMP Agent and for which the valueof the error-status field is “noSuchName”.snmpInBadValuesThe total number of SNMP PDUs that were delivered to the SNMP Agent and for which the valueof the error-status field is “badValue”.snmpInReadOnlysThe total number of valid SNMP PDUs that were delivered to the SNMP Agent and for which thevalue of the error-status field is “readOnly”. It should be noted that it is a protocol error to generatean SNMP PDU that contains the value “readOnly” in the error-status field, as such this object isprovided as a means of detecting incorrect implementations of the SNMP.snmpInGenErrsThe total number of SNMP PDUs that were delivered to the SNMP Agent and for which the valueof the error-status field is “genErr”.
