USER’S GUIDE228 SmartSwitch Remote Access ModuleAging TimeThe time period (in tenths of a second) used by the system to age unused entries out of the addresstable.Default Age TimeThe configured aging time the system uses.STP EnabledA flag that is set to “1” if the Spanning Tree protocol is enabled.TCP C OMMANDSTCP (Transmit Control Protocol) provides a connection-oriented reliable communication fordelivery of packets to a remote or on-node device. When the IP feature is enabled, the followingTCP commands are available:tcp connsDisplay the current TCP connection status with the following format:lportThe local port number for this TCP connection.fhostThe remote IP address for this TCP connection.fportThe remote port number for this TCP connection.window (l/r)The current receive windows for the local and remote ends of this TCP connection.tstateThe current state of this TCP connection.outq (s/u)The number of bytes that has been sent but not acknowledged yet and the number of bytes inthe output queue that has not been sent on this TCP connection.tcp statsDisplays the current system TCP related statistics. Refer to TCP Statistics, for a list of availablestatistics and their definitions.T ELNET C OMMANDSThese commands are Telnet client console commands. These commands provide tools for youwhen you are using the system as a Telnet client. As a Telnet client, the SmartSwitch Remote AccessModule can then be used to Telnet into another SmartSwitch Remote Access Module to performsystem maintenance, for example, updating configuration information. These commands are notneeded for a Telnet session as a rule, but may be beneficial for some users. For more information
