| 
USER’S GUIDE76 SmartSwitch Remote Access ModuleB RIDGE INITIALIZATIONProblem:The system does not display the following bridge initialization messages:LAN Port #> is now in the LISTENING stateLAN Port #> is now in the LEARNING stateLAN Port #> is now in the FORWARDING stateAction:1. Make sure the LAN Adapter has initialized correctly.2. Using SFVRA-CFG, check the configuration to verify the bridge is enabled. To do this:a. If it is not already running, start up SFVRA-CFG.b. From the toolbar, select Functions then select Sites or click the icon.c. From the displayed list, double click on the site in question.d. Click on the Systems tab.e. Select the system in question, then click on Edit System Settings.f. Under Bridging information, check to make sure that a check appears next to Enable(bridging information is included under the Properties tab).g. If you made a change, download the new configuration files to effected site.For more detailed instructions, refer to the following sections in the SFVRA ConfigurationManager User’s Guide:• For enabling bridging: refer to Configuring the Site’s Systems in the Configuring Sites chapter.• For downloading configuration files: refer to Downloading Configuration Updates in theExporting Configuration Files chapter.IP R OUTING INITIALIZATIONProblem:The system does not display the expected IP routing initialization messages.Action:1. If you did not see the following IP message:[IP] IP router is initialized successfullyUsing SFVRA-CFG, check the configuration to verify that IP routing is enabled. To do this:a. If it is not already running, start up SFVRA-CFG.b. From the toolbar, select Functions then select Sites or click the icon. |
