Chapter 6: Using the Web Interface106Column DescriptionDetails Click "Details" to trigger a dialog showing boththe alarm details and the acknowledgmentbutton.Only users who have the Acknowledge Alarms permission can manuallyacknowledge an alarm.To acknowledge an alarm:1. Double-click the alarm that you want to acknowledge, or click Detailsin the final column. A dialog appears.Click Acknowledge Alarm to acknowledge it. That alarm then disappearsfrom the Alarms section.Alerted SensorsOne of the sections on the Dashboard page only displays critical orwarning conditions detected by internal or external sensors so that youare alerted to take actions. This section is labeled Alerted Sensors.The Alerted Sensors section lists any or all of the following: Any sensor that enters the warning or critical range if thethresholds have been enabled Discrete (on/off) sensors that enter the alarmed stateDevice ManagementDisplaying the Device InformationThe Device Information dialog displays information specific to the EMXdevice that you are accessing, such as IDs and protocol versions ofasset sensors.To display the device information:1. Choose Maintenance > Device Information.Tab Information shownDevice Information General device information, such as modelname, serial number, firmware version,hardware revision, and so on.
