Chapter 6: Using the Web Interface229Example 1This example illustrates an event rule which continuously causes theEMX to send out email messages.Event selectedAction includedDevice > Sending SMTP messagefailedSend emailExample 2This example illustrates an event rule which continuously causes theEMX to send out SMTP messages when one of the selected eventslisted on the Device menu occurs. Note that under theDevice menu includes the event "Sending SMTP message failed."Event selectedAction includedDevice > Any sub-eventSend emailModifying an Event RuleYou can change an event rule's event, action, trigger condition and othersettings, if any.Exception: Events and actions selected in the built-in event rules are notchangeable, including System Event Log Rule, System SNMPNotification Rule, System Tamper Detection Alarmed, and SystemTamper Detection Unavailable.To modify an event rule:1.Choose Device Settings > Event Rules. The Event Rule Settingsdialog appears.2.On the Rules tab, select the event rule that you want to modify andclick Edit, or simply double-click that rule.3.To disable the event rule, deselect the Enabled checkbox.4.To change the event, click the desired tab in the Event field andselect a different item from the pull-down menu or submenu.