Chapter 6: Using the Web Interface2342. Click Yes on the confirmation message.Clearing Event EntriesIf it is not necessary to keep existing event history, you can remove all ofit from the local log.To delete all event entries:1. Choose Maintenance > View Event Log. The Event Log dialogappears.2. Click Clear Event Log.3. Click Yes on the confirmation message.Viewing Connected UsersYou can see which users are connected to the EMX device and theirstatus. If you have administrator privileges, you can terminate any user'sconnection to the EMX device.To view connected users:1. Choose Maintenance > Connected Users. The Connected Usersdialog appears, showing a list of connected users with the followinginformation:Column DescriptionUser Name The login name used by each connected user.IP Address The IP address of each user's host.For the login via a local connection (serial RS-232 orUSB), is displayed instead of an IP address.Client Type The interface through which the user is beingconnected to the EMX. Web GUI: Refers to the EMX web interface. CLI: Refers to the command line interface(CLI).The information in parentheses following "CLI"indicates how this user is connected to theCLI.- Serial: Represents the local connection(serial RS-232 or USB).- SSH: Represents the SSH connection.- Telnet: Represents the Telnet connection.