Chapter 5: Using the EMX68Control ButtonsThere are four control buttons. Up and Down buttons for selecting a specific target, which can be anenvironmental sensor's ID number or an asset sensor's port number MODE button for switching between various modes, including:- Sensor mode- Asset Sensor mode, indicated by the word ASSET, for showing theasset sensor information- Device modeSee Overview of the LCD Display (on page 67). FUNC (Function) button for switching between different data of theselected target, such as sensor readings, position information andserial number of an environmental sensor packageOperating the LCD DisplayAfter powering on or resetting this product, the LCD display panel showsthe first environmental sensor listed on the EMX web interface beforeyou select a different target.Environmental Sensor InformationThe environmental sensor mode is displayed as "SENSOR" on the LCDdisplay. Basic information about a specific environmental sensor isavailable, including the sensor's reading or state, X, Y, Z coordinates andits serial number.Below illustrates the environmental sensor information.Number Example informationThe selected target is the environmental sensor whose IDnumber is 9 (SENSOR 9).