Chapter 8: Using the Command Line Interface329Asset Sensor SettingsThis command shows the asset sensor settings, such as the totalnumber of rack units (tag ports), asset sensor state, numbering mode,orientation, available tags and LED color settings.# show assetStrip Variables: is one of the options: all, or a number.Option Descriptionall Displays all asset sensor information.Tip: You can also type the command withoutadding this option "all" to get the same data.A specific assetsensor numberDisplays the settings of the asset sensorconnected to the specified FEATURE port number.For the EMX device with only one FEATURE port,the valid number is always 1.Rack Unit Settings of an Asset SensorFor the Raritan asset sensor, a rack unit refers to a tag port. Thiscommand shows the settings of a specific rack unit or all rack units on anasset sensor, such as a rack unit's LED color and LED mode.# show rackUnit Variables: is the number of the FEATURE port where the selected assetsensor is physically connected. For the EMX device with only oneFEATURE port, the number is always 1. is one of the options: all or a specific rack unit's indexnumber.Option Descriptionall Displays the settings of all rack units on thespecified asset sensor.Tip: You can also type the command withoutadding this option "all" to get the same data.