Chapter 7: Using SNMP306The EMX MIBThe SNMP MIB file is required for using your EMX device with an SNMPmanager. An SNMP MIB file describes the SNMP functions.Downloading SNMP MIBThe SNMP MIB file for the EMX can be easily downloaded from the webinterface. There are two ways to download the SNMP MIB file.File download via the SNMP Settings dialog:1. Choose Device Settings > Network Services > SNMP. The SNMPSettings dialog appears.2. Click Download MIB. A submenu of MIB files appears.3. Select the desired MIB file to download. EMD-MIB: The SNMP MIB file for managing the EMX device. ASSETMANAGEMENT-MIB: The SNMP MIB file for assetmanagement. LHX-MIB: The SNMP MIB file for managing the LHX/SHX heatexchanger(s).4. Click Save to save the file onto your computer.File download via the Device Information dialog:1. Choose Maintenance > Device Information.2. Click the "download" link in the EMD-MIB,ASSETMANAGEMENT-MIB or LHX-MIB field to download thedesired SNMP MIB.The "USB Console INF file" link lets you download the USB-to-serialdriver that may be required only when the EMX is connected to acomputer via a USB cable. See Installing the USB-to-Serial Driver(Optional) (on page 12) for details.3. Click Save to save the file onto your computer.Note: If the LHX/SHX support has been enabled, LHX-MIB is availablefor download in either dialog.
