Chapter 8: Using the Command Line Interface330Option DescriptionA specificnumberDisplays the settings of the specified rack unit onthe specified asset sensor.Use the index number to specify the rack unit. Theindex number of each rack unit is available on theAsset Strip page of the web interface.Blade Extension Strip SettingsThis command shows the information of a blade extension strip,including the total number of tag ports, and if available, the ID (barcode)number of any connected tag.# show bladeSlot Variables: is the number of the FEATURE port where the selected assetsensor is physically connected. For the EMX device with only oneFEATURE port, the number is always 1. is the index number of the desired rack unit (tag port) onthe selected asset sensor. The index number of each rack unit isavailable on the Asset Strip page of the web interface. is one of the options: all or a specific number of a tagport on the blade extension strip.Option Descriptionall Displays the information of all tag ports on thespecified blade extension strip connected to aparticular rack unit.Tip: You can also type the command withoutadding this option "all" to get the same data.A specificnumberDisplays the information of the specified tag porton the blade extension strip connected to aparticular rack unit.The number of each tag port on the bladeextension strip is available on the Asset Strippage.
