Chapter 6: Using the Web Interface2394. Click Yes on the confirmation message.5. Click Close to quit the dialog.Checking Server Monitoring StatesServer monitoring results are available in the Server Reachability dialogafter specifying IT devices for the EMX device to monitor their networkaccessibility.To check the server monitoring states and results:1. Choose Device Settings > Server Reachability. The ServerReachability dialog appears.2. The column labeled "Ping Enabled" indicates whether the monitoringfor the corresponding IT device is activated or not. : This icon denotes that the monitoring for the correspondingdevice is enabled. : This icon denotes that the monitoring for the correspondingdevice is disabled.3. The column labeled "Status" indicates the accessibility of eachmonitored equipment.Status DescriptionReachable The monitored equipment is accessible.Unreachable The monitored equipment is inaccessible.Waiting for reliableconnectionThe connection between the EMX device and themonitored equipment is not reliably establishedyet.4. Click Close to quit the dialog.Environmental Sensors and ActuatorsThe EMX can monitor the environmental conditions, such as temperatureand humidity, where environmental sensors are placed. If an actuator isconnected to the EMX, you can use it to control a system or mechanism.To add environmental sensors and actuators:1. Physically connect environmental sensor packages to the EMXdevice. See Connecting Environmental Sensor Packages (onpage 39).2. Log in to the EMX web interface. The EMX should have detected theconnected sensors and actuators, and display them in the webinterface.
