Chapter 6: Using the Web Interface165 X min: This type of option sets the time limit to X minutes, whereX is a number. X h: This type of option sets the time limit to X hours, where X isa number. 1 d: This option sets the time limit to 1 day.Tip: If the desired time option is not listed, you can manually type thedesired time in this field. For example, you can type "4 min" to setthe time to 4 minutes.6. Click OK.Enabling Login LimitationsLogin limitations determine whether more than one person can use thesame login name at the same time, and how long users are permitted tostay idle before being forced to log out.To enable login limitations:1. Choose Device Settings > Security > Login Settings. The LoginSettings dialog appears.2. Locate the Login Limitations section.3. To prevent more than one person from using the same login at thesame time, select the "Prevent concurrent login with sameusername" checkbox.4. To adjust how long users can remain idle before they are forciblylogged out by the EMX, select a time option in the Idle TimeoutPeriod field. The default is 10 minutes. X min: This type of option sets the time limit to X minutes, whereX is a number. X h: This type of option sets the time limit to X hours, where X isa number. 1 d: This option sets the time limit to 1 day.Tip: If the desired time option is not listed, you can manually type thedesired time in this field. For example, you can type "4 min" to setthe time to 4 minutes.5. Click OK.Tip: Keep the idle timeout to 20 minutes or less if possible. This reducesthe number of idle sessions connected, and the number of simultaneouscommands sent to the EMX.
