Chapter 6: Using the Web Interface150Field Type this... Case sensitive4. Select the Enabled checkbox. Enabled users can log in to the EMXdevice.5. Select the "Force password change on next login" checkbox if youprefer a password change by the user when the user logs in for thefirst time after this checkbox is enabled.Note: Users with both the Change Local User Management andChange Security Settings permissions can choose to ignore thepassword change request. See Login (on page 84).6. Click the SNMPv3 tab to set the SNMPv3 access permission. Thepermission is disabled by default.a. To permit the SNMPv3 access by this user, select the "EnableSNMPv3 access" checkbox. Otherwise, leave the checkboxdisabled.Note: The SNMPv3 protocol must be enabled for SNMPv3 access.See Configuring SNMP Settings (on page 122).b. Set up SNMPv3 parameters if enabling the SNMPv3 accesspermission.Field DescriptionSecurity Level Click the drop-down arrow to select a preferredsecurity level from the list: NoAuthNoPriv: No authentication and noprivacy. AuthNoPriv: Authentication and noprivacy. AuthPriv: Authentication and privacy. Thisis the default.Use Password asAuthenticationPass PhraseThis checkbox is configurable only if AuthNoPrivor AuthPriv is selected.When the checkbox is selected, the authenticationpass phrase is identical to the user's password.To specify a different authentication pass phrase,disable the checkbox.AuthenticationPass PhraseType the authentication pass phrase in this field ifthe "Use Password as Authentication PassPhrase" checkbox is disabled.The pass phrase must consist of 8 to 32 ASCII
