Chapter 6: Using the Web Interface262 LED Mode: Select On to have the LED stay lit, Off to have itstay off, "Slow blinking" to have it blink slowly, or "Fastblinking" to have it blink quickly. LED Color: If you select On, "Slow blinking" or "Fast blinking"in the LED Mode field, select an LED color by either clickinga color in the color palette or typing the hexadecimal RGBvalue of a color in the accompanying text box.8. Click OK.Expanding a Blade Extension StripA blade extension strip, like an asset sensor, has multiple tag ports. Afterconnecting it to a specific asset sensor, it is displayed as a folder on thatasset sensor's page.Note: If you need to temporarily disconnect the blade extension stripfrom the asset sensor, wait at least 1 second before re-connecting itback, or the EMX device may not detect it.To expand a blade extension strip folder:1. Click the desired asset sensor in the left pane. The selected assetsensor's page opens in the right pane.2. Locate the rack unit (tag port) where the blade extension strip isconnected.