Chapter 6: Using the Web Interface205 Turn On: Turns on the selected actuator. Turn Off: Turns off the selected actuator.6. To select the actuator where this action will be applied, select it fromthe Available Actuators list and click to add it to the SwitchedActuators list box. To make multiple selections, press Ctrl+click orShift+click to highlight multiple ones.To add all actuators to the Switched Actuators list box, click .7. To remove any actuator from the Switched Actuators list, select itand click to move it back to the Available Actuators list box. Tomake multiple selections, press Ctrl+click or Shift+click to highlightmultiple ones.To remove all actuators, click .8. Click OK.Switch LHX/SHXIf Schroff LHX/SHX Support is enabled, the LHX/SHX-related actions willbe available. See Enabling and Disabling Schroff LHX/SHX HeatExchanger Support (on page 273).Use this action to switch the LHX/SHX on or off when, for example,temperature thresholds are reached.To create a switch LHX/SHX action:1. Choose Device Settings > Event Rules. The Event Rules Settingsdialog opens.2. Click the Actions tab.3. Click New.4. In the "Action name" field, type a new name for the action. Thedefault name is New Action , where is asequential number starting at 1.5. In the Action field, click the drop-down arrow and select the desiredaction: Switch LHX/SHX.6. From the Operation drop-down, select Turn LHX/SHX On or TurnLHX/SHX Off.7. From the Available LHX/SHXs list box, click on the LHX/SHX to beturned on or off, then click or to add to the SwitchedLHX/SHXs list box. Use or to remove the LHX/SHX from theSwitched LHXs list box, thereby removing the action.8. Click OK.
