Chapter 5: Using the EMX67Overview of the LCD DisplayDifferent types of information are shown in different sections of thecharacter LCD display. The diagram indicates the sections.Section Information shownThe selected mode and target, such as SENSOR 8,SENSOR 36, 1 SENSOR 28, CA (cascading mode), orthe number of the FEATURE port.The following information is displayed: Readings, data or state of the selected target. During the firmware upgrade, "FUP" is displayed.The "ALARM" status of the selected target.Examples: A numeric sensor enters the warning or critical level. A discrete (on/off) sensor enters the alarmed state. NO asset tag is detected on the selected rack unit.Note: For the Raritan asset sensor, a rack unit refers to atag port.The measurement unit of the displayed data, such as %or .This section indicates: The Asset Sensor mode if an asset sensor has beenconnected to the EMX. The device's USB-cascading state - MASTER orSLAVE. If it is a standalone device, neither MASTERnor SLAVE is displayed.
